Putting your phone into operation
Step 1: Connect up the base unit
For the analog landline network
Phone connector
with phone cable
1
G
Insert the small connector of the line cord into
the socket (engages).
G
Insert the cable in the cable duct.
G
Insert the phone connector in the phone socket.
2
G
Insert the small connector of the power cable
into the socket.
G
Insert the cable in the cable duct.
G
Plug the 3-pin adaptor into a mains power socket
and switch on.
*Country-specific
6
Plug-in power supply unit with
power cable (220/230 V)*
1
2