Step 4: Inserting The Batteries Into The Handset; Step 5: Charging The Batteries - Siemens Gigaset 2010 Tango Operating Instructions Manual

18.7.99

Step 4: Inserting the batteries into the handset

Batt. compartment cover
Batt. comp. and batteries

Step 5: Charging the batteries

kap02.fm5 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
The handset is powered by two batteries.
Hold the handset with the keypad side facing down.
Slot the batteries into the battery compartment.
Make sure that the +/– battery poles are aligned
correctly. The +/– marks on the plate must be
aligned with the +/– marks on the batteries.
The handset will not work if the batteries are in-
correctly inserted and it may be damaged.
Slide the cover of the battery compartment from above
into the grooves in the handset and close the compart-
ment.
To charge the batteries, place the handset in the handset
rest on the base station. The charging contacts on the
bottom of the handset must come into contact with the
bottom of the base station and its charging contacts. It
does not matter whether the keypad is facing up or down.
If you have correctly inserted the mobile unit for charging,
the LED under the battery symbol on the base station will
light up.
You must charge the batteries before you can
make any calls or settings. We recommend that
the batteries be charged for 16 hours without in-
terruption, e.g. overnight, for the initial start-up.
For more information on the use of the batteries
(
Stepwise start-up
page 6).
3