To Stop Playback - Pioneer X-HX700 Operating Instruction

Listening to other audio
equipment
Set up the playback function on the audio
equipment that is connected via the AUX
terminals. Set the volume level low to prevent
loud audio output from the CD/Receiver
System's speakers.
1
Press the SOURCE button repeatedly
until "AUX" appears in the display
panel.
Pressing this button cycles through the
following settings.
=CD = MD*= FM = AM = AUX
* Available only if the MD recorder (sold separately)
is connected to this system.
2
Start playback on the connected audio
equipment.
If necessary, read the instructions in the
equipment's operation manual.
3
Adjust the volume level.
Use the CD/receiver's VOL + / – buttons to
adjust the output volume.

To stop playback

Stop playback on the connected audio
equipment.