Stopping Playback - Pioneer X-HX700 Operating Instruction

Locating a particular point quickly
Press and hold the 4 or ¢ button during
playback to locate quickly a particular point.
Normal playback is resumed when you release
the button.
Pause
Press the 38 button.
Press the 38 button once again to resume
playback.
Go back/forward to start of track
Press the 4 button once quickly to start
playback from the start of the current track;
press multiple times to move backward to the
start of previous tracks.
Press the ¢ button once quickly to start
playback from the start of the next track; press
multiple times to move forward to subsequent
tracks.

Stopping playback

Press the 7 (STOP) button.
To remove a CD
Press where it says "PUSH OPEN" on the top of the CD/
receiver to open the cover, then remove the CD. Be sure
to stop playback by pressing the 7 (STOP) button before
opening the CD cover.
Repeat playback of
current track
You can set a favorite track to be played back
repeatedly.
While the desired track is playing, press
the MODE button until "ONE" appears in
the display panel.
To return to repeat playback of all
tracks
Press the MODE button several times until
"ALL" appears in the display panel.
Repeat playback of selected track
number
During Stop mode, press the MODE button
until "ONE" appears in the display panel, then
press the 4 or ¢ button until the desired
track number is displayed. Finally, press the
38 button.
During repeated playback of one track, if you
use the 4 or ¢ button to switch to another
track
The newly displayed track will be played repeatedly.
Random Play mode
When in Random Play mode, the CD's tracks
are played in random order. Since the order
changes each time, this mode adds an interest-
ing twist by making the next track unpredict-
able.
While a CD track is playing, press the
MODE button until "RANDOM" appears in
the display panel.
To return to repeat playback of all
tracks
Press the MODE button repeatedly until "ALL"
appears in the display panel.
Display panel
The information shown in the display panel can be
switched as described below by pressing the
DISPLAY button while playing a CD.
Current track number and total elapsed playback
time
Current track number and current track's remaining
playback time