Pioneer X-HX700 Operating Instruction page 11

3
Connect power cord
Insert the power cord into a wall outlet.
When connecting the power cord for the first
time
The time flashes on the CD/receiver's display panel.
CD/receiver's display panel
See page 17 for instructions on setting the time.
Listening with headphones
To connect headphones, open the CD/receiver's front
door and insert the headphone jack into the
"PHONES" jack (stereo mini-plug jack). See page 15
for instructions on opening the front door.
Output via the speakers is automatically muted
when the headphones are connected.
Time (flashing)
PHONES jack
Connection to other audio equipment
The CD/Receiver System can be used to play output
from other audio equipment connected to the CD/
receiver's AUX terminals.
Playing output from headphone terminal
of audio equipment
To do this, use an audio cord (commercially
available) that has two RCA (phono) plugs on one
end and one stereo mini-plug on the other end.
Connect the dual-plug end to the CD/receiver's AUX
terminals and the single-plug end to the headphone
terminal of the connected equipment (portable
cassette player, portable CD player, etc.).
AUX terminals
Playing output from LINE OUT terminal
of audio equipment
To do this, use an audio cord (commercially
available) that has two RCA (phono) plugs on each
end. Connect one dual-plug end to the CD/receiver's
AUX terminals and the other dual-plug end to the
LINE OUT terminal of the connected equipment (MD
player, DAT deck etc.).
AUX terminals
Headphone
terminal
LINE OUT
terminals