Table of Contents
Advertisement
Additional information
Line attenuator setting
If the source connected to the LINE analog
input is distorting, the attenuator can reduce
the signal level.
• ATT 6dB – Reduces the signal level by 6dB.
• ATT 10dB – Reduces the signal level by
10dB.
• ATT Off – No attenuation
Frequency step setting
If you find that you can't tune into stations
successfully, the frequency step may not be
suitable for your country/region.
• FM 50. AM 9
• FM 100. AM 10
System demo setting
Switches the automatic demo feature on or off
(this starts when the system is plugged in for
the first time):
• Demo On – Switches the demo feature on.
• Demo Off – Switches the demo feature off.
• After setting the clock, the demo mode
switches off automatically. However, if you
unplug the system from the wall outlet, the
demo mode will revert to Demo On (and
the clock will be reset).
Resetting the system
Use this procedure to reset all system settings
to the factory default.
1
Switch the system into standby.
2
Press and hold the front panel
button for about 8 seconds until the
display shows 'Mem.Clr.?'.
3
Press the front panel
All the system's settings are now reset, and
you should see the 'Let's Get Started' screen.
Using and taking care of discs
Titles, chapters and tracks
DVD-Video discs are generally divided into one
or more titles. Titles may be further subdivided
into chapters.
Title 1
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2
DVD-Audio discs are divided into one or more
groups that can each contain a number of
tracks.
Group 1
Track 1
Track 2
CDs, SACDs and Video CDs are divided into
tracks.
Track 1
Track 2
CD-ROMs contain folders and files. MP3 files
are referred to as tracks. Folders may contain
further folders.
(stop)
Folder A
Track 1
Track 2
button.
Title 2
Title 3
Group 2
Group 3
Track 3
Track 1
Track 1
Track 2
Track 3 Track 4
Track 5
Track 6
Folder B Folder C
Track 3
Track 1
File 1
File 2
12
75
En
Hide quick links:
Advertisement
Table of Contents
