Error Messages - Pioneer XV-HTD640 Operating Instruction

Dvd/cd receiver; speaker system; wireless speaker system
Hide thumbs Also See for XV-HTD640:
Table of Contents

Advertisement

Additional information
Problem
Horizontal stripe noise
interference on a TV set near
the transmitter.
When the system is switched
on, or during operation:
HTD-645DV – The POWER
indicator goes out.
HTD-641DV – The POWER
button pops up.

Error Messages

Message
Child Lock
Rec Mode On
Phones In
DVD-AUDIO
SACD
96k Stereo
No Surr. SP
Normal / Wide / Left Side/
Right Side / W. Stereo
Muting
Exit
SR+ Error
Remedy
• If there a piece of A/V equipment with an antenna near the
transmitter, move the transmitter away from the antenna input terminal
of the AV equipment.
• It is likely that the system is malfunctioning. Ask your nearest Pioneer
authorized service center or your dealer to carry out repair work.
Description
• This message appears when the front panel buttons are pressed when
the child lock feature is active. See Child lock setting on page 74 for more
on switching on/off the child lock.
• Blinks rapidly for 2 seconds when an operation is prohibited because
the Recording Mode is on (see Recording mode on page 81).
• Blinks rapidly for 2 seconds when an operation is prohibited because
headphones are connected.
• Blinks rapidly for 2 seconds when an operation is prohibited because
the source is DVD-Audio.
• Blinks rapidly for 2 seconds when an operation is prohibited because
the source is a Super Audio CD.
• Blinks rapidly for 2 seconds when an operation is prohibited because
the source is digital 88.2 or 96kHz PCM.
• Blinks rapidly for 2 seconds when an operation is prohibited because
there is no surround speaker output.
• Blinks rapidly for 2 seconds when an operation is prohibited due to the
wireless speaker setting.
• Blinks rapidly for 2 seconds when an operation is prohibited because
the sound is muted (press the MUTE button to turn the sound on).
• Appears briefly when a menu is automatically exited after a set period of
inactivity.
• Appears when there is a communication problem between the unit and
the plasma display. Check all connections and retry.
12
87
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents