Connecting To Your Tv; Connecting Using The S-Video Output - Pioneer XV-HTD640 Operating Instruction

02 Connecting up

Connecting to your TV

This system has three different kinds of video
output that you can use to connect up your TV.
Check the available inputs on your TV to see
which you can use.
• Do not connect a VCR between this system
and your TV as DVD playback will be
affected.
• Use the supplied video cable to connect
the VIDEO OUT jack to a video input on
your TV.
TV
P
R
COMPONENT
VIDEO OUT
P
B
• Placing the system unit too close to your TV
may cause interference, especially if you're
using an indoor antenna. If you notice
interference, move the system unit away
from the TV.
16
En
VIDEO
INPUT
VIDEO
IN
OUT
CONTROL
S-VIDEO
OUT
Y
VIDEO
SPEAKERS
FRONT
SUB
CENTER
WOOFER
R L

Connecting using the S-video output

If your TV has an S-video input, you can use this
instead of the standard video output for a
better quality picture.
• Use an S-video cable (not supplied) to
connect the S-VIDEO OUT to an S-video
input on your TV.
Line up the small triangle below the jack with
the same mark on the plug before plugging in.
TV
VIDEO
OUT
P
R
COMPONENT
VIDEO OUT
P Y
B
VIDEO
• The S-video output is switchable between
S1 and S2 formats for compatibility with all
TVs. See Video Output settings on page 69
for more on this.
S-VIDEO
INPUT
IN
CONTROL
S-VIDEO
OUT
SPEAKERS
FRONT
SUB
CENTER
WOOFER
R L