Wall-Mounting The Center And Surround Speaker System - Pioneer XV-HTD640 Operating Instruction

Connecting up
If not connected, simply set up your speakers
using the Standard surround setup as shown
below, disregarding the surround speakers in
the diagram. Using the wireless speaker, you
can still achieve exceptional surround sound
from your system.
Transmitter/
XV-HTD640
Front left
CHANNEL
Surround
left
Wireless speaker
For best surround sound, make sure to place
the wireless speaker directly behind the center
of the listening position and no higher than ear
level. Also, make sure you don't move the
wireless speaker too far behind the listening
position or you will lose much of the surround
sound effect. For more placement options, see
Using the wireless speaker system on page 41.
• For a greater surround sound effect from
the wireless speaker, see Setting the
channel levels on page 66 to increase the
surround channel levels.
• As well as setting the wireless mode on the
speakers, you must also set the mode on
the main unit. See Using the wireless
speaker system on page 41 for more on
this.
Sub-
Front right
woofer
Center
Surround
right
to AC outlet
Wall-mounting the center and
surround speaker system
Surround speakers are not supplied with the
HTD-641DV. Illustration shows the HTD-645DV.
Before mounting
• Remember that the speaker system is
heavy and that its weight could cause the
wood screws to work loose, or the wall
material to fail to support it, resulting in the
speaker falling. Make sure that the wall you
intend to mount the speakers on is strong
enough to support them. Do not mount on
plywood or soft surface walls.
• Mounting screws are not supplied. Use
screws that are suitable for the wall
material and that will support the weight of
the speaker.
Wood screw
Protrusion: 5-7mm
• If you are unsure of the qualities and
strength of the walls, consult a
professional for advice.
• Pioneer is not responsible for any
accidents or damage that result from
improper installation.
02
5 mm
10 mm
5 mm
15
En