Auto Setup (With Q Link Functions); To Set Up This Dvd Recorder With A Brand-New Q Link Tv; To Set Up This Dvd Recorder With An Existing Q Link Tv - Panasonic DMR-E100H Operating Instructions Manual

∫ Before Use

Auto Setup (with Q Link Functions)

DVD TV
Í, DVD
SKIP
ShowView DIRECT TV REC
STOP
∫
1
DIRECT NAVIGATOR
TOP MENU
3, 4, 2, 1
ENTER
FUNCTIONS
FUNCTIONS
FRAME

To Set Up this DVD Recorder with a brand-new Q Link TV

[1] Switch the TV on.
The TV automatically starts to tune all available TV
stations and to adjust the clock. (This is called Auto Setup
function.)
≥When the TV has
finished its own
auto setup, the
DVD Recorder is
automatically
switched on, and
the downloading of
the setup data
from the TV to the
DVD Recorder
starts. Indication during downloading
[2]
When Download
has finished, the
screen for the
Owner ID setting
menu appears.
Press [1]
RETURN
and the
numeric
buttons to
enter a 4-digit PIN number.
≥Make sure that you will remember the PIN number (make a
note of it).
[3] Press [ENTER] and [4]. The cursor
moves to "Name".
[4] Press [1].

To Set Up this DVD Recorder with an existing Q Link TV

[1] Switch the TV on.
[2] Select the AV input on your TV.
[3] Press [DVD, Í] to switch the DVD Recorder on.
≥ Downloading of the setup data starts automatically.
[4] To set up the Owner ID, repeat the steps 2–7 above.
DVD TV
DVD
HDD
DVD
HDD DVD
SLOW/SEARCH
INPUT SELECT AV
PAUSE PLAY/x1.3
2 3
PLAY LIST
MENU
ENTER
RETURN
RETURN
MANUAL SKIP TIME SLIP
Download
Pos 4
Download in progress, please wait.
RETURN : to abort
RETURN
Owner ID
PIN number ¢¢¢¢
Name
House No.
Postcode
RETURN : leave
Menu for Owner ID setting
If you do not have a Q Link TV, ignore this page and go to page 17.
The Preset Download function can automatically copy the tuning
position of all available TV stations into the DVD Recorder's
memory when you connect the DVD Recorder using a fully-wired
21-pin Scart lead to a TV equipped with the Q Link function.
Preparation
Perform the following operation steps exactly as described to
ensure that the Preset Download function works correctly.
≥First of all, make sure that the DVD Recorder is switched off.
[5] Press [3, 4, 2, 1] to select a letter
and then press [ENTER].
≥Repeat this to enter the name.
[6] Enter "House No." and "Postcode" in
the same way.
[7] Press [RETURN].
The Owner ID setting disappear.
Hint:
≥If you use a Panasonic Q Link TV and perform the operation step
1 above, starting the downloading of the setup data will
automatically display the "Download" indication. However, in
case of a TV of another make, the "Download" indication may not
appear. In this case, select the AV input on your TV if you want to
see the "Download" indication.
Notes:
≥The explanations in this book refer to Panasonic Q Link TV and
DVD Recorder, however they may also apply to other makes of
TV and DVD Recorder with similar functions to Q Link. (See page
13 for details.)
≥If you accidentally switch on the DVD Recorder before the TV,
downloading of the setup data from the TV may not be performed
correctly. In this case, follow the steps below.
1) Wait until the Auto Setup is complete on both the TV and the
DVD Recorder.
2) Press [FUNCTIONS] to display the top window on the TV
screen and then use [3, 4, 2, 1] to select "SETUP" and
press [ENTER].
3) Use [3, 4, 2, 1] to select "Tuning" and then "Download".
4) Press [ENTER] and select "Yes". Downloading of the setup
data from the TV to the DVD Recorder starts.
5) When the programme position and the current time appear in
the DVD Recorder display, downloading is complete.
16
Download
Pos 4
Download in progress, please wait.
RETURN : to abort
RETURN