Pentax EI-200 Operating Manual page 75

[Preferences] menu
Sound screen
Changing The Settings Of Functions Of The Camera
1
Displaying the sound screen
1Turn of the power to set the mode dial to the capture
mode mark.
2Press the menu button to display [Capture Settings]
menu.
3Press the right key on the four-way controller three
times to display [Preferences] menu.
4Press the down arrow on the four-way controller to
highlight [Sound].
5Press the left soft key to select the soft menu [Edit].
A sound screen appears on the display.
2
Setting the volume and whether or not the system
sound is signaled
1While Volume [4] is highlighted, press the left and right
arrows on the four-way controller to select the volume.
The volume is a volume when the recorded sound is
replayed or a volume of system sound.
[1] ... Sets the volume lowest.
[4] ... Standard volume
[7] ... Sets the volume largest.
2Press the down arrow on the four-way controller to
highlight [System Sounds].
3Press the left and right arrows on the four-way control-
ler to select whether or not system sounds are emitted.
Setting the system sound accompanying the operation
such as starting sound or shutter sound.
[Off] ... No operation sound is signaled.
[On] ... Operation sound is signaled.
4Pressing the right soft key to select the soft menu [Exit]
will return the system to [Preferences] menu screen.
When resetting the system to the initial state, press the
left soft key to select the soft menu [Default].
5Press the right soft key to select the soft menu [Exit].
The volume is adjusted to the set contents.
73