Pentax EI-200 Operating Manual page 125

4
Starting printing
1Place the infrared data transmitter on this camera
facing towards the infrared (IR) port of the printer.
2Press the left soft key to select the soft menu [Send].
The message [Connecting...] is displayed on the LCD
monitor of the camera.
3Press the [Print] button on the printer.
4Set up a type of paper or size according to the
message displayed on the printer's LCD.
Please refer to the user's manual attached to the printer
using for operation.
5 On determining the printer's configurations, orient the
camera's IR data transmitter again to the printer's IR
port and press [OK/YES] button.
[Printing] message will be displayed, followed by
starting with the printing.
Printing The Pictures You Have Taken
Infrared data transmitter
Position this camera and the printer facing each
other.
Place the transmitter of this camera and the
receiver of the printer close together and facing
each other.
123