Pentax EI-200 Operating Manual page 130

128
2Press the left soft key to select the soft menu [Mark].
The lower right of the selected picture is clipped and
the soft menu [Unmark] is displayed.
3Repeat the same procedure and select all the pictures
to be transmitted.
To cancel a picture once it has been chosen, press the
left soft key to select the soft menu [Unmark].
If collapsed Timelapse shooting or group shooting is
selected, all the pictures collapsed will be transmitted.
If you want to select pictures within Timelapse shooting
or group shooting separately, press the right soft key
and select the soft menu [Expand] to expand the
pictures and individually select the pictures you want.
3
To display the [Transmit] menu
1Press the menu button and the [Edit] menu is
displayed.
2Press the right arrow on the four-way controller twice to
display the [Transmit] menu and [Camera-Camera] is
displayed in highlighted text.
4
To start transmission
1Place the infrared data transmitter on the transmitter
side facing towards the infrared data transmitter on the
receiver side.
The infrared data transmitter
Place two cameras facing each other.
Put the cameras closer together and allow
the infrared data transmitters on each
camera face each other.