Pentax EI-200 Operating Manual page 67

[Image Stamp] menu
[Text Stamp] screen before input
Screen with the stamp text function being
[On]
List of letters to be input
Text edit screen
Display area of input letters
1
Show [Image Stamp] screen
1Turn on the power supply and set the mode dial to the
capture mode mark.
2Press the menu button, and the [Capture Settings]
menu appears.
3Press the right arrow of the four-way controller twice,
and the [Image Stamp] menu appears.
4Press the lower arrow of the four-way controller, and
[Text] is displayed in highlighted text.
5Press the left soft key to select [Edit] on the soft menu.
The [Text Stamp] screen is then displayed.
2
Enter letters to be stamped
1If the left and right arrows on the four-way controller are
pressed while the text stamp [Off] is displayed in
highlighted text, the text stamp [On] will be displayed
in highlighted text.
2Press the left soft key to select the soft menu [Edit].
3Press the left soft key to select the type of letters to be
input.
Available types of letters to be input
It is possible to display a list of the following types of
letters to be input by pressing the left soft key.
[A] ....Capital Letters
[a] ....Small Letters
[1] ....numbers (1...0)
[%] ....symbols (/,&,#,etc.)
[À] ....European characters
Stamping Date & Time And Text On A Picture
65