Pentax EI-200 Operating Manual page 137

Message
Card requires formatting. Formatting
will delete everything on the memory
card.
Camera could not display this image.
This group name already exists. Do
you wish to enter a new group name or
continue with the current group name?
No Thumbnail.
The receiving camera does not have
enough memory to receive images.
Camera did not establish connection.
Be sure IR ports are correctly aligned
and try again.
Transfer interrupted. Some images
were not sent.
Battery depleted.
Battery Low.
Cause and Remedy
The memory card installed is formatted for use with a personal
computer. It is necessary to format the memory card to be used
in the camera. If the soft menu [Format] is selected, it will delete
date in the memory card and perform formatting.
The data, which was edited using image editing software of a
personal computer, is saved in the memory card. Data edited on
a personal computer can not be displayed in the presentation
mode.
When you create a new group, you are trying to register a name
which already exists. Select the soft menu [Create New] to
register a group with a different name.
In the memory card there is data saved which was edited using
image editing software a personal computer. Data edited on a
personal computer can not be displayed in the review mode.
There is not enough memory in the receiving camera to receive
the number of images when sending and receiving images
between two cameras. Please delete unwanted pictures or
replace with a new memory card.
While sending and receiving images between two cameras,
images could not be sent and received because one of camera
was facing the wrong way. Set the infrared data transmitter of
both cameras to face each other and try sending and receiving
images again.
While sending images to print with a printer, the images could not
be sent correctly because the camera became misaligned with
respect to the printer. Set the infrared data transmitter of the
camera to face the printer and try sending images again.
There is only a little battery power remaining, please replace with
new batteries.
There is no battery power remaining, please replace with new
batteries.
Error/Alert Message Table
135