Pentax EI-200 Operating Manual page 51

3
Soft menu [Timelapse]
Timer display Number of Images
The screen while taking photos
The number of pictures can be set from 2 to 1000.
However, a message [Not Enough Memory] will be
displayed if there is not enough room in the memory
card for the designated number of images when
starting the exposure. Please set a number within the
number of images possible displayed on the LCD
panel.
2Press the down arrow on the four-way controller to
display [Interval] in highlighted text.
3Press the left and right arrows on the four-way control-
ler to display interval to be set.
4After setting, press the right soft key to select the soft
menu [Exit].
[Capture Settings] menu will return on the screen.
5Select the soft menu [Exit] by pressing the right soft
key to return to a capturing state from menu screen.
3
Switching to timelapse shooting mode
1Press the display button to display the live view screen.
2Press the left soft key to display the soft menu
[Timelapse].
To save battery power, press the display button so as
not to display the LCD monitor.
4
Start timelapse shooting
1Show a photo to be taken in the AF frame
press the shutter release button halfway down.
2Confirm that the green lamp lights up and press the
shutter release button.
The first photo will be taken. The first picture is taken,
and a Timer Display which counts down from the
designated time at the fixed interval, and the number of
pictures taken so far will be shown on the LCD monitor.
Press the right soft key to select [Stop] to cancel
shooting at any time during shooting.
3The first captured picture will be displayed on Instant
Review screen when Timelapse shooting is finished.
About The Various Capture Methods
and
49