Pentax OPTIO L40 Operating Manual page 175

e_kb453.book Page 173 Monday, July 23, 2007 3:35 PM
Data being processed
Green mode must be
canceled to use this
function.
No image to be
processed
This image/sound
cannot be processed
No card in the camera
The card memory is not
enough to copy images/
sounds
The built-in memory is
not enough to copy
images/sounds
Cannot process
correctly
Messages such as the following may appear on the LCD monitor when
using the PictBridge function.
Low paper level in the
printer
Low ink level in the
printer
No paper in the printer
No ink in the printer
Printer error
Data error
Paper stuck in the
printer
Connection error Check
printer
No image to be
processed
Wrong DPOF setting
This message appears when the camera takes more than
five seconds to display an image due to image processing,
or when the SD Memory Card or built-in memory is being
formatted.
This function is not available in Green Mode. Press the
Green button to cancel Green Mode. (p.66)
This message appears when no image/sound file is
present.
This message appears when you attempt to edit a file that
cannot be processed.
This message appears when an SD Memory Card is not
inserted and [Image/Sound Copy] is selected.
This message appears when there is not enough memory
to copy to the SD Memory Card/built-in memory.Insert a
new SD Memory Card or delete unwanted images. (p.26,
p.118)
This message appears when Red-eye Compensation
cannot be performed correctly.
The paper is running low in the printer.
The ink is running low in the printer.
There is no paper in the printer.
There is no ink in the printer.
An error message has been sent from the printer.
A data error message has been sent from the printer.
The paper is stuck in the printer.
PictBridge connection failed. Check the connection and try
again. (p.138)
This message appears when there are no images that can
be printed.
This message appears when DPOF printing is not
available.
9
173