Reducing Camera Shake And Blurring When Taking Pictures (Digital Sr Mode); Digital Sr - Pentax OPTIO L40 Operating Manual

e_kb453.book Page 63 Monday, July 23, 2007 3:35 PM
Reducing Camera Shake and Blurring when
Taking Pictures (Digital SR Mode)
In c (Digital SR mode), the camera automatically raises the sensitivity to reduce
camera shake and blurring when taking pictures. The camera also sets the shutter
speed (set to remain faster than 1/15 sec.) and aperture automatically. However,
you can select other functions such as the flash mode and recorded pixels.
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select c

(Digital SR).

3
Press the 4 button.
The shooting mode is selected and the camera returns to capture status.
4
Set the functions you want to use.
Refer to "Setting the Shooting Functions"
(p.79 - p.95) for details of how to set the
functions.
5
Press the shutter release button
halfway.
The focus frame on the LCD monitor turns
green if the subject is in focus.
6
Press the shutter release button fully.
The picture is taken.
When shooting mode is set to c, the sensitivity is automatically
adjusted to between ISO 50 and 3200. (p.91)
5, 6
1, 2
3
c
08/01/2007 08/01/2007
19:25 19:25 19:25
4
38 38 38
63