Selecting the signal of ET-MD95VM2(sold separately)
When using the projector with the optional ET-MD95VM2 Video Input Module, select the appropriate video signal
format that matches the video equipment you are using.
Setting procedure
Press the MENU button. ... The MENU screen will be displayed.
Press the UP (
) and DOWN (
Press the ENTER button. ... The OPTION screen will be displayed.
Press the UP (
) and DOWN (
MODULE SETTING.
Press the ENTER button. ... The VIDEO MODULE SETTING screen will
be displayed.
Press the UP (
) and DOWN (
INPUT MODULE.
Press the UP (
) and DOWN (
signal system and press the UP (
select input signal format "LINE or Y/C" o r "YC
•The selected signal format will be displayed.
(The picture may be distorted while the signal format is being switched.)
If chose "LINE or Y/C" n step
(
) arrow buttons to select the video system and press the LEFT (
and LIGHT
) arrow buttons to select the "AUTO1" or "AUTO2 "
•The selected signal format will be displayed.
(The picture may be distorted while the signal format is being switched.)
Press the MENU button 3 times consecutively.
•The OSD information will go off.
) arrow buttons to select OPTION.
) arrow buttons to select VIDEO
) arrow buttons to select the desired
) arrow buttons to select the input
) and DOWN (
) arrow buttons to
C
".
b
r
above, press the UP (
) and DOWN
)
41