Connecting the signal source to the input module for analogue RGB signals
If using the input module for analogue RGB signals in order to connect the projector to a personal computer, you
will also need to use a separate interface (D-SUB
1.Connecting an analogue RGB signal source
RGB signal input module (sold separately)
RGB Module
ET-MD95RGB
H/H · V
R G
B
D-SUB /BNC
Personal computer
2.Connecting a component signal source
RGB signal input module (sold separately)
R/P
RGB Module
ET-MD95RGB
P
/C
r
Y
R
High-definition VCR
BNC) cable.
ET-MD95RGB
G/Y
B/P
R/P
B
R
V
(Purchase adapter cable locally)
CAUTION:
• Ternary synchronization signals cannot be input to the
H/H
• Do not input synchronization signals to the H/H
terminals when SYNC ON GREEN signals are being input.
( "C" means "composite sync" in H/H
ET-MD95RGB
H/H · V
G/Y
B/P
R
B
P
/C
P
/C
Y
b
r
B
R
DVD player
H/H · V
V
V and V terminals.
•
V
Note:
• Connect either the VCR or DVD player
P
/C
b
B
using three BNC cable.
Three BNC-to-RCA adaptors may be
required at the DVD player.
V and V
•
V.)
•
31