Installing The Input Module - Panasonic PT-D9510E Operating Instructions Manual

Installing the input module

Obtain the required input modules (sold separately) beforehand in accordance with the system input signal.
• Types of input module (sold separately)
Input signal
RGB/YP Pr/YC Cr
b b
signal
Video signal
Serial digital signal
Serial digital signal
HD Serial digital signal
SVGA,XGA,SXGA signals
• Input slot numbers
• The signal sources connected to the input modules can each be selected by specifying the respective
NOTE
slot number using the input select buttons on the remote control unit or the projector operating panel.
For details on selecting the input source refer to page 40.
• Modules other than the optional specified ones cannot be inserted into the slots 1, 2, and 3.
28
Module No.
ET-MD95RGB
Colour difference input signal
ET-MD95VM2
ET-MD95SD1
ET-MD95SD2
ET-MD95SD3
ET-MD95T
The bays (slots) in which the input modules are inserted
are numbered 1, 2 and 3 in order starting from the top,
as shown in the illustration at left.
The slots can be used in any order, and the same type
Slot 1
of input module can be inserted into more than one slot
Slot 2
at the same time. In addition, the projector will
Slot 3
automatically detect which input module has been
inserted into which slot.
It is necessary to select VIDEO or Y/C input and adjust
the input signal after the input module has been
inserted.
Input signal level
Video/Sync. signal input impedance : 75 /1 k
R/P Cr, B/P C : 0.7 V [p-p] or 1.0 V [p-p] with
b
R B
BETACAM input
G/Y 0.7 V [p-p]
(1.0 V [p-p]when SYNC ON G/Y signal is input)
Composite sync/Separate sync : 0.6 V [p-p]-4.0 V [p-p]
with 75 , TTL level with 1 k
Analogue RGB input signal
f : 15 kHz—100 kHz, fV: 24 Hz—120 Hz,
H
dot clock frequency: 20 MHz—162 MHz
Applicable formats: 480i, 576i, 480p, 720/60p,
1080/60i(1035/60i)1080/50i, 1080/30p,
1080/25p, 1080/24p, 1080/24sF
Video / Y : 1.0 V [p-p], C : 0.286 V [p-p]
Cr / C : 0.7 V [p-p] Impedance :
b
Conforming to SMPTE259M
Conforming to SMPTE259M/SMPTE294M
Conforming to SMPTE292M
Conforming to TMDS
75