Editing A Caller's Telephone Number Before Calling Back; Erasing Caller Information - Panasonic KX-FC962FX Operating Instructions Manual

4. Telephone
4.10 Editing a caller's
telephone number before
calling back
4.10.1 With the cordless handset
1
Press {j/OK}.
2
Select "Caller List", then press {>}.
3
Press {e} or {v} repeatedly to display the
desired item.
4
To erase a number
Press {j/OK}, select "Edit and Call",
then press {>}.
Press {<} or {>} to place the cursor on the
number you wish to erase, then press {C/T}.
To add a number
Press the dial key ({0} to {9}).
L The number you pressed is added to the
top of the current number.
5
Press {C} or {s}.
4.10.2 With the base unit
1
Press {CALLER ID}.
2
Press {A} or {B} repeatedly to display the
desired item.
3
Press {CALLER ID} repeatedly to display
the telephone number.
4
To erase a number
Press {*} to enter edit mode.
Press {<} or {>} to place the cursor on the
number you wish to erase, then press
{STOP}.
To add a number
Press the dial key ({1} to {9}).
L The number you pressed is added to the
top of the current number.
5
Lift the handset or press {SP-PHONE} to call
back the edited number.
L The unit will start dialling automatically.
L To send a fax, insert the document FACE
DOWN and press {FAX/START}.
Note:
L The edited telephone number will not be
saved as caller information. To store it into
the base unit phonebook, see page 38.
36
To correct a mistake
1. Press {<} or {>} to move the cursor to the
incorrect number.
2. Press {STOP} to delete the number.
3. Enter the correct number.
To delete a number
Press {<} or {>} to move the cursor to the
number you want to delete and press {STOP}.
To insert a number
1. Press {<} or {>} to move the cursor to the
position to the right of where you want to
insert the number.
2. Enter the number.
4.11 Erasing caller
information
4.11.1 With the cordless handset
1
Press {j/OK}.
2
Select "Caller List", then press {>}.
3
Press {e} or {v} repeatedly to display the
desired item, then press {j/OK}.
4
Select "Erase", then press {>}.
L To erase all items, select "Erase All",
then press {>}.
5
Select "Yes", then press {>}.
6
Press {ih}.
4.11.2 With the base unit
Erasing all caller information
1. Press {MENU} repeatedly to display
"CALLER SETUP".
2. Press {SET}.
L "CALL LIST ERASE" will be displayed.
3. Press {SET}.
L To cancel erasing, press {STOP} 3 times.
4. Press {SET}.
5. Press {STOP}.
Erasing specific caller information
1. Press {CALLER ID}.
2. Press {A} or {B} repeatedly to display the
desired item.