Answering Calls Manually; Receiving A Call Manually With An External Phone; Switch The Automatic Or Manual Reception Mode - Konica Minolta BIZHUB 130F User Manual

9
9.1.4

Answering calls manually

Note
To answer a call manually, you must install an external phone to your
machine. Make sure the document is not set on the ADF.

Receiving a call manually with an external phone

In "Tel Ready" or "Tel/Fax Ready" mode, when the external phone rings,
pick up handset:
G If you hear someone speaking to you, speak back.
G If you hear fax tones ("beep — beep — beep"), put the handset down,
but do not hang up. Walk to your machine and press [Start]. After you
press [Start], hang up the external phone's handset. Because remote
fax machines will wait several seconds to hear reception tones from
your machine, you have about 30 seconds to walk to your machine
and press [Start].
9.1.5

Switch the Automatic or Manual reception mode

1
Make sure that the machine is in the fax mode. If not, press
[Copy] % [Fax] % [Scan] to switch to the Fax mode.
2
Press [Advanced Functions] until
"Auto Rx" is appear on the LCD then
press [Enter].
3
Press [,] or [+] to select on or off.
H
To switch to manual reception mode, select "Off"
H To switch to automatic reception mode, select "On"
4
Press [Enter] to save the setting.
Note
If you assigned "Auto Rx" to the soft key ("11 Special features [CD]"),
you can toggle Manual reception (Tel Ready) and Automatic reception
(you have set) by pressing that key.
9-4
Receiving faxes
Auto Rx :Off
/ /Enter
130f