Using The Energy Save Mode - Konica Minolta BIZHUB 130F User Manual

2
2.5.4

Using the Energy save mode

In order to conserve energy, your machine is initially set to be in the
energy save mode automatically when the machine is idle for approx.
5 minutes.
In Energy save mode, the machine stops pre-heating for printing and
displays "Energy Save Mode" on the LCD. However, the LED lamps in the
control panel and scanner lamp will not be off even when the machine is
in the energy save mode.
To recover from energy save mode, press any key in the control panel.
When your machine receives a fax message during energy save mode,
the machine will wake up automatically.
To change the Energy save mode setting:
1
Press [Menu], [2], [1], [0], [5],
[Enter].
2
Press [,] or [+] to select on or off.
3
Press [Enter] to save the setting.
4
Press [Reset] to exit and return to the standby mode.
Note
The setting specifying the time until the machine enters Energy save
mode can be changed. Refer to "Idle time setting for switching to the
Energy save mode" on page 2-19" of "Entering Initial settings" on
page 2-16.
If you assign "Energy Saving" to the soft key, you can switch your
machine to the Energy save mode immediately by pressing the soft
key, regardless of the on/off setting and time setting. For details of the
soft key, see "11 Special features [CD]".
2-20
Layout and installation
Energy Save Mode:On
/ /Enter
130f