Warning - Konica Minolta BIZHUB 130F User Manual

1
1.1.3

WARNING

1-2
• Do not modify this product, as a fire, electrical shock, or breakdown could
result. If the product employs a laser, the laser beam source could cause
blindness.
• Do not attempt to remove the covers and panels which have been fixed to
the product. Some products have a high-voltage part or a laser beam
source inside that could cause an electrical shock or blindness.
• Use only the power cord supplied in the package. If a power cord is not
supplied, only use the power cord and plug that is specified in POWER
CORD INSTRUCTION. Failure to use this cord could result in a fire or
electrical shock.
• Use the power cord supplied in the package only for this machine and
NEVER use it for any other product. Failure to observe this precaution
could result in a fire or electrical shock.
• Use only the specified power source voltage. Failure to do so could result
in a fire or electrical shock.
• Do not use a multiple outlet adapter to connect any other appliances or
machines. Exceeding a power outlet's current rating could result in a fire or
electrical shock.
Do not unplug or plug in the power cord with a wet hand, as an electrical shock
could result.
Plug the power cord all the way into the power outlet. Failure to do this could
result in a fire or electrical shock.
• Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on,
or damage the power cord. Use of a damaged power cord (exposed core
wire, broken wire, etc.) could result in a fire or breakdown.
Should any of these conditions be found, immediately turn off the machine,
unplug the power cord from the power outlet, and then call your authorized
service representative.
• Avoid using an extension cord. Use of an extension cord could cause a fire
or electrical shock. Contact your authorized service representative if an
extension cord is required.
• Do not place a flower vase or other container that contains water, or metal
clips or other small metallic objects on this product. Spilled water or metallic
objects dropped inside the product could result in a fire, electrical shock, or
breakdown.
• Should a piece of metal, water, or any other similar foreign matter fall inside
the product, immediately turn off the machine, unplug the power cord from
the power outlet, and then call your authorized service representative.
• Do not continue using this product if it becomes unusually hot or if it emits
smoke, unusual odors or noise. Immediately turn off the machine, unplug
the power cord from the power outlet, and then call your authorized service
representative. If you continue using it in this condition, a fire or electrical
shock could result.
• Do not continue using this product if it has been dropped or its cover is
damaged. Immediately turn off the machine, unplug the power cord from
the power outlet, and then call your authorized service representative. If
you continue using it in this condition, a fire or electrical shock could result.
Do not throw the toner cartridge or toner into an open flame. The hot toner
may scatter and cause burns or other damage.
Safety Information
130f