Konica Minolta BIZHUB 130F User Manual page 41

Layout and installation
Fax reception mode
8
The machine now shows the
machine's current reception mode.
9
For now, select Fax Ready. (For
description of the reception mode,
see "Selecting the reception mode" on page 9-1 .)
10
Press [Enter] to save the setting and continue.
Dial tone detection
11
The machine asks you to set
whether the machine should detect
a dial tone before dialling.
12
Normally select "Off". If you need to
detect a dial tone at dialling, select "On", however you cannot send a
fax when there is no dial tone.
13
Press [Enter] to save the setting and continue.
Your fax number
14
The machine now asks you to enter
your fax number as you want it to
appear on other fax machines's
displays or printouts.
15
Use the numeric keys to enter your fax number. The number can
contain up to 20 characters.
To enter a "+" symbol before your contry code, press [Advanced
Functions] repeatedly until "Pause/Dial Opt." is displayed on the LCD
then press [Enter].
To enter the hyphen "–" to make long numbers easier to read, press
[Advanced Functions] repeatedly until "Pause/Dial Opt." is displayed
then press [Enter]. Repeat this procedure again to enter a "–"
character on the LCD.
If you make a mistake, press [Cancel] to erase to the left. To change
just one number, press [*] or [)] to move the cursor, press [Cancel]
to erase the number. Then re-enter the fax number correctly.
16
Press [Enter] to save the number.
130f
Fax Ready
/ /Enter
DialTone Detect :Off
/ /Enter
Your Fax Number
+44-870-608-6084_
2
2-17