Making Copies; Making Copies Using The Adf; Making Copies Using The Document Glass - Konica Minolta BIZHUB 130F User Manual

Copying
4.2

Making copies

4.2.1

Making copies using the ADF

1
Switch the machine to copy mode
by pressing [Copy] % [Fax] %
[Scan]
2
Place your document face up on the
ADF and adjust document guides to the document size.
3
As needed, set the copy settings including the document type and
scanning contrast, number of copies, zoom ratio and sort setting. (See
"Basic copy settings" on page 4-4 .)
4
To clear the settings, press [Reset].
5
Press [Start] to begin copying.
To stop the copying, press [Stop].
4.2.2

Making copies using the Document glass

1
Switch the machine to copy mode
by pressing [Copy] % [Fax] %
[Scan]
2
Make sure that there is no
document on the ADF. If a document is on the ADF, this document
takes priority over the document on the document glass.
3
Place your document face down on the document glass and align it to
the left upper corner. Then close the platen cover.
4
Press [Doc. Size] to select the document size, A4, A5 š or F4.
5
As needed, set the copy settings including the document type and
scanning contrast, number of copies, zoom ratio and sort setting. (See
"Basic copy settings" on page 4-4 .)
To clear the settings, press [Reset].
6
Press [Start] to begin copying.
To stop the copying, press [Stop].
130f
.
.
Copy Ready
[A4 ] A4 100%
Copy Ready
[A4 ] A4 100%
4
01
01
4-3