Forward/Reverse Rapid Scene Search; Resume Function; Forward/Reverse Chapter/Track Skip; Auto-Power Off Function - Panasonic PV-DF2003-K Operating Instructions Manual

* Important: If a remote control button does not work when pressed, press the DVD button on the
remote and try the button again.

■ Forward/Reverse rapid scene search

➞ Press FF/SLOW+ or REW/SLOW-
during play.
➞ Press PLAY to release.
• Starting forward/reverse search during play started from
menu on Video CDs may recall menu.
• Search speed, slow at fi rst, increases with each
additional press of the button up to 5 levels.

■ Forward/Reverse Chapter/Track Skip

➞ Press SKIP+
|
play.
Each press skips a chapter (DVD) or track
(Video CD/CD).
Pressing SKIP- once midway through a
|
chapter/track returns to start of that chapter/track.
Each additional press skips back one chapter/track.
|
• Pressing SKIP+ or SKIP-
started from menu on Video CDs may recall menu.
Current playback position
Chapter/Track Chapter/Track Chapter/Track
Reverse Skip

■ Still (Pause) Picture

➞ Press STILL/PAUSE during play.
➞ Press PLAY to release
• DVD/Video CD : The unit will enter Still picture mode.
• CD : The unit will enter Pause mode.
■ Frame by Frame picture (DVD/Video
CD)
➞ Press STILL/PAUSE in Still mode.
➞ Press PLAY to release.
• Each press advances picture one frame.
• Hold down for consecutive frame advance.
• Whether pictures are advanced by "FRAME" or
"FIELD" is selected automatically (see page 68).
■ Slow Motion picture (DVD/Video CD)
➞ Press FF/SLOW+ or REW/SLOW- (DVD
only) in Still mode.
➞ Press PLAY to release.
• Slow motion speed, slow at fi rst, is increased with
each additional press of the button up to 5 levels.
• Reverse slow motion is not available for video CDs.
or SKIP- during
|
|
during play
Chapter/Track
Forward Skip
.
• When appears on the screen while a
button is being pressed, it means that the
corresponding operation is prohibited by the
unit or the disc.

RESUME function

The unit memorizes the point where STOP is
pressed (STOP display on the screen).
Press PLAY to resume play from this point.
Pressing STOP again or opening the tray cancels
RESUME, however, RESUME is not cancelled
when power is turned off and on.
• RESUME works only with discs for which elapsed
play time is displayed during play.

Auto-Power Off function

Power turns off after unit has been in Stop mode
(DVD) for about 5 minutes.
Enjoy Video CDs featuring
playback control without using
menus (Video CDs only)
1. Do steps 1-3 (previous page).
When menu appears, press STOP.
2. Press NUMBER key(s) to select desired
track (play begins).
• Check disc for track numbers.
• Press "1" to start at beginning of disc.
To Resume Menu use,
Press STOP, and press PLAY, then the menu
appears. Now, go to step 4 (previous page).
Notes
• Please read the disc jacket for operation information.
• If a single sided disc is placed in upside down, "THIS
TYPE OF DISC CANNOT BE PLAYED. PLEASE
INSERT A DIFFERENT DISC" is displayed.
• Remove disc and press unit POWER off when not in
use.
• Disc continues to rotate with menu displayed even
after play is done. Press STOP to clear menu display
when fi nished with menu.
23