Initial Setup (Ready To Play); Tv-Vcr - Panasonic PV-DF2003-K Operating Instructions Manual

Initial Setup
Please make all cable or antenna connections before powering on.

Initial Setup (Ready to Play)

Press on the remote for TV-VCR mode.
Plug the unit power cord into an AC wall outlet.
1
2
3
CH AUTO SET PROCEEDING
AUTO CLOCK SET
PROCEEDING
CANCEL : PRESS STOP KEY
4
2 / 6 / 2003 THU 12 : 00PM
DST : ON
SETT I NG : CH 1 0
AUTO CLOCK SET
COMPLETED
If AUTO CLOCK SET IS INCOMPLETE screen appears,
set the clock using MANUAL CLOCK SET procedure on
next page.
AUTO CLOCK SET
I S I NCOMPLETE
PLEASE SET CLOCK BY
PRESS I NG ACT I ON KEY
16
(Ready to Play)
Press POWER* on the
remote or unit.
Press CH to select
English.
OR
Press CH to select
French (Français).
OR
Press VOL+ to select
Spanish (Español).
Auto channel and clock
set starts.
• If you use a cable box, turn it
on and set it to the Public
Broadcasting Service (PBS)
channel in your time zone.
If you use a DSS receiver, it
must be turned off.
Settings are made
automatically. When
setup is done, this
screen appears.
EJECT
POWER

TV-VCR

SELECT
SET
ACTION
STOP
Notes
• Function buttons are inoperative during
Initial Setup.
• To remove a cassette during Auto Set,
press EJECT twice on the remote or
STOP twice on the unit. In this case,
settings must be made manually. (See
pages 18-19.)
• Depending on conditions, Auto Clock
Set may take longer than 30 minutes.
In this case, press STOP to stop setup
and perform settings manually. (See
pages 18-19.)