Konica Minolta 7065 Instruction Manual page 266

Section 13 : Maintenance & Supplies
Inserting a New Staple Cartridge into FS-106 Finisher
When the staple cartridge of the finisher is empty, "Please open finisher door Replace
staples" message displays on the touch screen. Follow the procedure below to remove
the empty cartridge from the finisher cartridge housing and set the new cartridge .
Use only the staples supplied by Konica. Contact your service centre to reorder.
Procedure
1 Open the Finisher door.
2 Push down the cartridge housing release lever, then remove the cartridge housing.
3 Remove the empty cartridge from the cartridge housing.
4 Insert the new cartridge into the housing.
13 - 8