Data Printing Mode - Konica Minolta 7065 Instruction Manual

EKC (Electronic Key Counter) [3] (continued)

Data Printing Mode

Use this function to print the following three types of data for confirmation.
Data options: copy quantity for each password, copy limit for each password, copy
quantity for each paper size
Procedure
1 While pressing [P] and [9].
2 Press [ START PRINT ]. The following message will be displayed.
Enter E.K.C. master code
3 Enter your 8-digit EKC master key code. (See note.) The following message will be
displayed.
Data printing mode 1 (1 ~ 3)
Please switch OFF after printing
4 Print out the data of each mode.
To print out the data of copy quantity for each password, press [1] and [ START
PRINT ].
Data printing mode 1 (1 ~ 3)
Please switch OFF after printing
To print out the data of copy limit for each password, press [2] and [ START PRINT ].
Data printing mode 2 (1 ~ 3)
Please switch OFF after printing
To print out the data of copy quantity for each paper size, press [3] and [ START
PRINT ].
Data printing mode 3 (1 ~ 3)
Please switch OFF after printing
5 Turn power OFF.
NOTE:
If an invalid EKC master key code is entered, continue by entering the valid 8-digit code.
Section 12 : Key Operator Mode
EKC
12
Key Operator
Mode
12 - 25