Switching The Ekc On Or Off [4] - Konica Minolta 7065 Instruction Manual

EKC (Electronic Key Counter) [3] (continued)

Switching the EKC On or Off [4]

Use this function to turn EKC On or Off.
EKC Setting Menu Screen
Procedure
1 While pressing [ HELP ], turn power ON. Enter a 4-digit key operator password, then
touch OK to display the Key Operator Mode Screen. (See note 1.)
2 Touch [3] EKC . The EKC Master Key Code Screen displays, if a code is required.
3 Enter your 8-digit EKC master key code, then touch OK to display the EKC Setting
Menu Screen. (See note 2.)
4 Touch [4] Switching the EKC On or Off to display the EKC On/Off Setting Screen.
5 Touch EKC On to activate EKC or touch EKC Off to de-activate EKC.
The selected key will be highlighted.
6 If no further changes are required, proceed to step 9.
7 If other EKC setting changes are required, touch PREVIOUS SCREEN to return to
the EKC Setting Menu Screen. Touch desired key, from [1]~[5].
8 If no other EKC settings are required, touch PREVIOUS SCREEN to restore the Key
Operator Mode Screen.
9 Turn power OFF.
10 Turn the copier power switch back ON to perform copying operations.
NOTES:
1 If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 If an invalid EKC master key code is entered, continue by entering the valid 8-digit code.
Section 12 : Key Operator Mode
EKC On/Off Setting Screen
EKC
12
Key Operator
Mode
12 - 23