Table of Contents
Advertisement
Section 13 : Maintenance & Supplies
Loading Paper
Add Paper Indicator (
The Add paper indicator light goes on when a tray is empty and flashes when the key for
that tray is touched. Add paper to a tray when the Add paper indicator light is on or
flashing.
Paper Level Indicator (Tray 5)
Paper level is indicated on the outside of Tray 5 to enable you to see when paper is low.
When a paper tray is empty, a message prompts you to load paper.
Do not exceed the following tray limits:
Tray 1:
Tray 2:
Tray 3:
Tray 4:
Tray 5:
Multi-sheet bypass tray: 100 sheets 80g/m
(Do not load above the red line on rear guide.)
Using the HELP Key
To learn how to load paper at any time, press [ HELP ], then touch any tray to display
instructions on the touch screen. For details on tray position size vs. paper size, see
Section 4: Paper Information.
Tray Error Indicator ( ! )
If a paper tray is overloaded, or if the tray is loaded with a paper size that does not conform
to the tray position size, the tray error message displays. In this case you must touch
PAPER SIZE . The tray in error will be highlighted.
See the following pages for instructions on loading paper in trays 1~5.
13 - 2
)
500 sheets 80g/m
500 sheets 80g/m
1,000 sheets 80g/m
1,500 sheets 80g/m
3,500 sheets 80g/m
Before loading
paper, fan the stack
to prevent sheets
from sticking
together.
2
2
2
2
2
2
When placing a stack
of paper in to the tray,
be sure to load it with
the curl turning up, i.e.,
with concave side up.
Advertisement
Table of Contents
Troubleshooting
