LSQT1039ENG.book 30 ページ 2006年2月1日 水曜日 午後3時13分
Self-timer recording
You can record still pictures on a card using the
timer.
≥Set to Card Recording Mode.
1
Press the joystick to display the icon. Move
the joystick down until icon 1 appears.
2
Move the joystick left to select the self-timer
recording icon [
].
≥The [SELF-TIMER ON] indication appears on
the screen of the movie camera.
3
Press the [PHOTO SHOT] button.
≥After the recording lamp and the [
indication flashes for approx. 10 seconds,
recording will start. After recording, the
self-timer will be cancelled.
ª
To stop the timer midway through
Press the [MENU] button.
≥The self-timer standby mode is cancelled when
you turn off the power or operate the mode dial.
≥If the continuous photoshot recording is set, the
maximum recordable pictures are recorded.
30
LSQT1039
Record mode
Recording images for wide-screen
(NV-GS57 only)
TVs
This allows you to record images compatible with
wide-screen TVs.
Cinema Function
Images are recorded with a black belt appearing
along the top and bottom of the screen so that
they look like theatre movies.
≥Set to Tape Recording Mode.
1
1
ª
Set [BASIC] >> [CINEMA] >> [OFF].
≥Images played back vary depending on the TV
PHOTO
≥This function does not widen the recording
SHOT
≥When images are played back on a TV screen,
]
≥Depending on the TV, the picture quality may
≥When a cinema picture is imported into a
Set [BASIC] >> [CINEMA] >> [ON].
To cancel the Cinema function
connected. Please refer to the operating
instructions for your TV.
range.
the date/time indication may be erased in some
cases.
deteriorate.
personal computer, the imported picture may
not be displayed correctly, depending on the
software in used.