Comparison Of Current And Previous Measurements; Display Previous Measurement Results - Kompernass KH 5518 Instructions For Use Manual

ô
Note:
If you would like to track the development of
your body fat, muscle mass and body water
percentages over a period of time: Write down
the displayed measurement results in a table
aft er each measurement.
We recommend comparing your meas-
urement results with the tables in the ac-
companying informational material to
gain a better understanding of the values.
Th is informational material includes av-
erage values for body fat, body water and
muscle mass percentages according to age
and gender.
6
If you remain standing on the scales, the de-
vice will automatically shut off aft er  sec-
onds. If you step down from the scales, .
kg will appear again on the display screen
aft er a few seconds. Th e scales are now ready
for further body weight measurement.
9.3. Comparison of current and
previous measurements
You can compare all currently displayed measure-
ments with the most recently measured results.
ô
Note:
Th e comparison display does not function in
guest mode, because no measurement values
are stored in this mode.
To compare the current measurement results
with previous results:
1
Remain standing on the scales while the
current measurement results are being
displayed.
2
Press the i button once. Th e previous
measurement result will blink on the dis-
play screen for comparison with the cur-
rent result.
Fig. 2: Current and previous body water
percentage measurement in comparison
3
In order to display comparisons of cur-
rent and previous measurement values
for other measurement areas: Press the
up or down button briefl y. Each time you
press one of these buttons, one of the
measurement areas (body fat percentage,
muscle mass percentage, body water per-
centage and caloric requirement) are dis-
played. Th e current measurement result is
displayed for each measurement area and
the previous measurement result blinks
in the display screen.
9.4. Display previous
measurement results
To display your most recently measured re-
sults for ...
Ú
weight
Ú
body fat percentage
Ú
muscle mass percentage
Ú
body water percentage
1
Press the on/off button to turn on the dis-
play remote control unit. "Balance" and
"––––" will appear on the display screen.
2
Press the down button once. - appears
on the display screen. Subsequently the
number of one of the memory locations
for personal data will blink on the screen.
13