Lan Setup - NETGEAR DGN2200v3 User Manual


To change the MTU size:
Select Advanced > Setup > WAN Setup.
1.
In the MTU Size field, enter a value from 64 to 1500.
2.
Click Apply to save the settings.
3.

LAN Setup

The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The modem router is shipped preconfigured to use private IP addresses on the LAN side and
to act as a DHCP server. The modem router's default LAN IP configuration is:
LAN IP address. 192.168.1.1
•
Subnet mask. 255.255.255.0
•
These addresses are part of the designated private address range for use in private networks
and are suitable for most applications. If your network requires a different IP addressing
scheme, you can change these settings in the LAN Setup screen.

To change the LAN settings:
If you change the LAN IP address of the modem router while
Note:
connected through the browser, you will be disconnected. You will
have to open a new connection to the new IP address and log in
again.
Select Advanced > Setup > LAN Setup to display the following screen:
1.
N300 Wireless ADSL2+ Modem Router DGN2200v3
NETGEAR genie Advanced Home
45