Basic Wireless Settings - NETGEAR DGN2200v3 User Manual

name (account name) for All – no password is guest. The password for admin is the
same one that you use to log in to the modem router. By default, it is password.
Folder Name. Full path of the network folder.
Volume Name. Volume name from the storage device (either USB drive or HDD).
Total/Free Space. Shows the current utilization of the storage device.
Edit. Click the Edit button to edit the Available Network Folders settings.
•
Safely Remove a USB Device. Click to safely remove the USB device attached to your
•
modem router.
You can click Refresh to update this screen.
For more information about USB storage, see

Basic Wireless Settings

The Wireless Settings screen lets you view or configure the wireless network setup.
The N300 Wireless ADSL2+ Modem Router comes with preset security. This means that the
Wi-Fi network name (SSID), network key (password), and security option (encryption
protocol) are preset in the factory. You can find the preset SSID and password on the bottom
of the unit.
The preset SSID and password are uniquely generated for every
Note:
device to protect and maximize your wireless security.

To view or change basic wireless settings:
NETGEAR recommends that you do not change your preset security
your preset security settings, make a note of the new settings and store it in a safe place
where you can easily find it.
If you use a wireless computer to change the wireless network name (SSID) or other wireless
security settings, you are disconnected when you click Apply. To avoid this problem, use a
computer with a wired connection to access the modem router.
N300 Wireless ADSL2+ Modem Router DGN2200v3
NETGEAR genie Basic Settings
33
Chapter 5, USB Storage.
If you change
settings.