NETGEAR DGN2200v3 User Manual page 131

N300 Wireless ADSL2+ Modem Router DGN2200v3
Click Apply. The VPN Policies screen displays:
4.
Repeat these steps for the DGN2200v3 on LAN B. Pay special attention to the following
5.
network settings:
General, Remote Address Data (for example, 14.15.16.17)
•
Remote LAN, Start IP Address
•
IP Address (for example, 192.168.0.1)
-
Subnet Mask (for example, 255.255.255.0)
-
Pre-shared Key (for example, 12345678)
-
Use the VPN Status screen to activate the VPN tunnel:
6.
The VPN Status screen is only one of three ways to active a VPN
Note:
tunnel. See
about the other ways.
a. Select VPN > VPN Status to display the VPN Status/Log screen. Then click VPN
Status to display the Current VPN Tunnels (SAs) screen:
b. Click Connect for the VPN tunnel that you want to activate. Review the VPN
Status/Log screen to verify that the tunnel is connected.
Activate a VPN Tunnel
Virtual Private Networking
131
on page 121 for information