NETGEAR DGN2200v3 User Manual page 113

N300 Wireless ADSL2+ Modem Router DGN2200v3
c. In the ID Type drop-down list, select IP Address. If you are using a virtual fixed IP
address, enter this address in the Internal Network IP Address field. Otherwise,
leave this field empty.
d. In the Internet Interface section of the screen, select the adapter that you use to
access the Internet. If you have a dial-up Internet account, select PPP Adapter in
the Name field. If you have a dedicated cable or DSL line, select your Ethernet
adapter. If you will be switching between adapters or if you have only one adapter,
select Any.
e. In the My Identity section of the screen, click the Pre-Shared Key button. The
Pre-Shared Key screen displays:
f. Click Enter Key. Enter the modem router pre-shared key, and then click OK. In this
example, 12345678 is entered, though asterisks are displayed in the field. This field
is case-sensitive.
Configure the VPN client authentication proposal.
5.
In this step, you provide the type of encryption (DES or 3DES) to be used for this
connection. This selection has to match your selection in the modem router configuration.
a. In the Network Security Policy list on the left side of the Security Policy Editor window,
expand the Security Policy heading by double-clicking its name or clicking the +
symbol.
b. Expand the Authentication subheading by double-clicking its name or clicking the +
symbol. Then click Proposal 1 below Authentication.
Virtual Private Networking
113