Ipv6 - NETGEAR DGN2200v3 User Manual

N300 wireless adsl2+ modem router
Hide thumbs Also See for DGN2200v3:
Table of Contents

Advertisement

Advertisement Period. The advertisement period is how often the modem router
broadcasts its UPnP information. This value can range from 1 to 1440 minutes. The
default period is 30 minutes. Shorter durations ensure that control points have current
device status at the expense of additional network traffic. Longer durations can
compromise the freshness of the device status, but can significantly reduce network
traffic.
Advertisement Time to Live. The time to live for the advertisement is measured in hops
(steps) for each UPnP packet sent. The time to live hop count is the number of steps a
broadcast packet is allowed to propagate for each UPnP advertisement before it
disappears. The number of hops can range from 1 to 255. The default value for the
advertisement time to live is 4 hops, which is fine for most home networks. If you notice
that some devices are not being updated or reached correctly, then it might be necessary
to increase this value.
UPnP Portmap Table. The UPnP Portmap Table displays the IP address of each UPnP
device that is currently accessing the modem router and which ports (internal and
external) that device has opened. The UPnP Portmap Table also displays what type of
port is open and whether that port is still active for each IP address.
Click Apply to save your settings.
7.

IPv6

You can use this feature to set up an IPv6 Internet connection type if genie does not detect it
automatically.
To set up an IPv6 Internet connection type:
Select Advanced > Advanced Setup > IPv6 to display the following screen:
1.
Select the IPv6 connection type from the list. Your Internet service provider (ISP) can provide
2.
this information.
If your ISP did not provide details, you can select IPv6 Tunnel.
If you are not sure, select Auto Detect so that the modem router detects the IPv6
type that is in use.
If your Internet connection does not use PPPoE, DHCP, or fixed, but is IPv6, then
select IPv6 auto config.
Click Apply so that your changes take effect.
3.
N300 Wireless ADSL2+ Modem Router DGN2200v3
Advanced Settings
100

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents