The Control Panel - Hoover Nextra HNF6137 Instruction Book

40001406Eng.qxd 31/08/2004 11:20 Page 17

The Control Panel

CHRONOVISION
Door Locked Indicator Temperature
Programme
Display
(Blocco Porta) Selector
Selector
(Temperatura
Lavaggio)
Spin Speed
Pre Wash Fast Iron
Start/Pause Delay Start Extra Rinse
Selector
(Pre Lavaggio) (Stiro
(Avvio (Partenza (Extra
(Giri
Veloce)
Pausa) Differita) Risciacquo)
Centrifuga)
The programme selector must be returned to the OFF
position to reset the controls between each wash cycle.
Turning the machine on
The machine is turned on by selecting a programme via the programme
selector. This status will be indicated by the STOP indicator light flashing, this
light will continue to flash until the machine has started or the machine is
returned to the OFF position.
Start/Pause (Avvio/Pausa)
Start (Avvio)
After selecting the programme and the required options press the Avvio Pausa
button once to start the machine. The STOP light will stop flashing and START
light will illuminate and there will be a short time delay to the start of the
programme while the machine sets the wash parameters for the selected
programme and options. If the duration of the programme you have selected
is shorter than 60 minutes, then the time remaining indicator will illuminate
accordingly. The Blocco Porta indicator light will also illuminate a few seconds
after pressing the Avvio Pausa button.
17