Duplex Sending - Kyocera FS-1128MFP Operation Manual

Duplex Sending

Select the type and binding of original depending on the original.
The table below lists the binding directions for each original type.
Original
1-sided Sheet Original
2-sided Sheet Original
* Only when the optional document processor is installed for
FS-1028MFP.
Use the procedure below to select the original type and binding direction when sending scanned originals.
Function Menu:
1 Color Selection g
*********************
2 Original Size
3
Original Image
Duplex:
1 *1-sided
*********************
2 2-sided
OPERATION GUIDE
Type
1-sided
2-sided*
1
2
3
a b
T
T
[ Exit ]
4
5
a b
[ Detail ]
6
7
8
Binding
— —
Binding Left/Right, Top Edge Top,
Binding Top Top Edge Left
Press the Send key.
Place the originals on the platen.
Press the Function Menu key. Function Menu
appears.
Press the or key to select [Duplex].
Press the OK key. Duplex appears.
Press the or key to select [1-sided] or [2-
sided].
If you select [2-sided], press [Detail] (the Right
Select key), select the binding edge and press the
OK key, and then select the original setting
orientation on the next screen.
Press the OK key.
Completed. is displayed and the screen returns to
the basic screen for sending.
Specify the destination, and press the Start key to
start sending.
Sending Functions
Binding
5-7
5