Kyocera FS-1128MFP Operation Manual page 332

Default Setting (System Menu)
IPSec Setting
Make this setting when you use IPSec. The default setting is On and that of Rule Setting is also Off.
Use the procedure below to make the setting.
Sys. Menu/Count.:a b
1
Report
2
Counter
3 System
*********************
Login User Name:
*******************
Login Password:
[ Menu
System:
1 Network Setting
*********************
2 I/F Block Set.
3
Security Level
Network Setting: a b
4
WSD-SCAN
5 WSD-PRINT
6 IPSec
*********************
IPSec:
1 *Off
*********************
2 On
8-144
[ Exit ]
L b
] [ Login ]
a b
[ Exit ]
[ Exit ]
a b
1
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
2
The System menu appears.
3
Press the or
4
Press the OK key. The Network Setting menu
appears.
5
Press the or
6
Press the OK key. IPSec appears.
7
Press the or
key to select [Network Setting].
key to select [IPSec].
key to select [On] or [Off].
OPERATION GUIDE
or