Kyocera FS-1128MFP Operation Manual page 321

Network Setting: a b
1 TCP/IP Settings
*********************
2 NetWare
3 AppleTalk
WSD-SCAN:
1 *Off
*********************
2 On
WSD Print Setup
Select whether or not to use WSD Print. The default setting is On.
Use the procedure below to setup the WSD-PRINT setting. The machine must be restarted after the setting is
changed.
Sys. Menu/Count.:a b
1 Report
2
Counter
3
System
*********************
Login User Name:
*******************
Login Password:
[ Menu
System:
1
Network Setting
*********************
2 I/F Block Set.
3
Security Level
OPERATION GUIDE
4
[ Exit ]
5
6
a b
7
8
1
[ Exit ]
L b
] [ Login ]
2
a b
[ Exit ]
Default Setting (System Menu)
Press the OK key. The Network Setting menu
appears.
Press the or key to select [WSD-SCAN].
Press the OK key. The WSD-SCAN menu appears.
Press the or key to select [On] or [Off].
Press the OK key. Completed. is displayed and the
screen returns to the Network Settings menu.
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
The System menu appears.
8
or
8-133