Kyocera FS-1128MFP Operation Manual page 293

Sleep Timer
If you select [On] for Auto Sleep, set the amount of time to wait before Auto Sleep. Options are between 1 and
240 minutes (every one minute)
Use the procedure below to set the Auto Sleep time. The default setting is 15 minutes.
Sys. Menu/Count.:a b
4 User/Job Account
5
User Property
6
********************* Common Settings
Common Settings: a b
1
Language
*********************
2
Default Screen
3
Sound
Login User Name:
*******************
Login Password:
[ Menu
Timer Setting:
1
Err. Clear Timer
*********************
2
Sleep Timer
3 PanelReset Timer
Sleep Timer:
OPERATION GUIDE
[ Exit ]
[ Exit ]
L b
] [ Login ]
a b
[ Exit ]
D b
(1 - 240)
******15*min.
Default Setting (System Menu)
1
In the Sys. Menu/Count. menu, press the
key to select [Common Settings].
2
Press the OK key. The Common Settings menu
appears.
3
Press the or key to select [Timer Setting], and
press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
4
The Timer Settings menu appears.
5
Press the or key to select [Sleep Timer].
6
Press the OK key. Sleep Timer appears.
7
Press the or key to set the Sleep Timer. Set
the amount of time before entering the sleep state
or
8
8-105