Feeding Envelopes - Mita DP-2800 Instruction Handbook Manual

Feeding Envelopes

7. The message display will display Processing after which the message Set paper Press
CONTINUE will be displayed.
If you want to abandon the manual feeding procedure, press the CANCEL key. The message
display will indicate Print Cancel? Current job. Press the ENTER key. Printing
will stop and the printer will return to " Ready ".
8. If you wish to continue printing, press the CONTINUE key. Paper loaded in the tray will be fed
and printed. To continue printing in manual mode, repeat the steps from step 4.
Envelopes should be fed face up. Be sure to set the print direction from the Mode Select Menu. Insert
the envelopes in the tray as far as they will go. Do not load envelopes above the paper limit mark.
For details on suitable envelope paper quality and shape, see Appendix B. Be sure to use suitable
envelopes as print quality may be reduced.
For the envelope sizes which can be used with this printer, see the table on page 2-5.
Chapter 1 Safetyguards and Installing the Page Printer
Paper limit mark
Envelopes
1- 41