Mita DP-2800 Instruction Handbook Manual page 59

The Multi-Purpose Tray
First mode
1- 38
3. Check that the message Ready is displayed in the printer's message display, and that the ON
LINE indicator is lit.
4. Set the paper source to the multi-purpose tray by pressing the FEED key until the message
display indicates MP tray. The multi-purpose tray indicator on the control panel will flash, and
Add paper will be displayed.
5. Press the MODE key to display MP tray mode
4
6. Press the (Form Feed) key to display >MP tray size, then press the ENTER key so
you can set the paper size to be fed from the multi-purpose tray. See Mode Select Menu at
the end of this HANDBOOK.
The manner in which paper is fed in each of these modes is explained below.
1. Press the MODE key to display MP tray mode
2. After pressing the ENTER key, the mode display is changed by pressing the + and – keys.
Display First and then press the ENTER key.
MP tray mode
First
3. Press the EXIT key.
Note______________________________________________________________________
In this mode, the paper source indicator on the control panel does not change while paper is being fed
from the multi-purpose tray.
>.
>.
>