Expanding Memory - Mita DP-2800 Instruction Handbook Manual

Expanding Memory

Expanding Memory
Memory Required by the Printer Environment
1- 42
The printer comes standard equipped with 4 MB of main memory. However, more complex pages can
be printed and processing speed increased by expanding the printer's memory. There are two slots
available in the printer for expanding memory. Printer memory can be expanded to up to 68 MB by
installing optional extended memory chips (SIMMs) in these slots.
Note______________________________________________________________________
The expansion memory should be installed only by an authorized dealer or a certified technician. We
shall not be liable for damage due to improper installation of the expansion memory.
It may be necessary to extend memory depending on the operating environment of the printer. Please
refer to the table below for minimum memory requirements in various environments.
Printing Environment
HP LaserJet 5Si (factory setting)
HP LaserJet 5Si, duplex mode = on*
HP LaserJet 5Si, duplex mode = off
Resource protection
HP LaserJet 5Si, duplex mode = off
Resource protection
*An optional duplex unit (AD-31) is required for duplex printing.
Minimum Memory Required
Resolution: 300 dpi Resolution: 600 dpi
4 MB
4 MB
—
—
4 MB
6 MB
10 MB
14 MB