Mita DP-2800 Instruction Handbook Manual page 120

The alarm will continue to sound while the error condition continues (if the printer is in the sleep mode,
the alarm will be silent for that period alone). The alarm will cease to sound, however, when the
CANCEL key is pressed.
To rectify the various error conditions listed above, please refer to Chapter 5 of this manual, or to the
operating manuals accompanying the various optional equipment.
Notes_____________________________________________________________________
·
If you wish to cancel the data being processed while the audio alarm is sounding, press the
CANCEL key twice. Firstly, the audio alarm will be turned off, and then the data processing will be
canceled.
·
After the audio alarm has been set to ON, even if the PRESCRIBE II FRPO INIT command is
executed, the printer will not return to the initial (off) alarm setting. To set the audio alarm to off,
reset using the mode select menu from the control panel.
Resource Protection
2-51