Error Messages - Mita DP-2800 Instruction Handbook Manual

Indicators and Messages

Error Messages

5-12
Message
Memory overflow
Press CONTINUE
Print overrun
Press CONTINUE
MEMORY CARD err
Insert again
Insert the same
MEMORY CARD
Warning battery
MEMORY CARD
Corrective Action
Current print processing cannot continue due to insufficient memory.
Check available user memory by printing a status page, and either remove
unnecessary download fonts and/or macros or expand the printer's memory.
Press the CONTINUE key to print data as far as it was stored. You can
abandon printing by the CANCEL key.
Current print processing cannot continue due to insufficient memory.
The data transferred to the printer was too complex to print on a page.
Check available user memory by printing a status page, and either remove
unnecessary download fonts and/or macros or expand the printer's memory.
Note: After this message has been displayed, Page protect mode will be on.
To maintain optimum use of memory during printing, display >Page protect
from the mode select menu, and re-select Auto.
Press the CONTINUE key to print data as far as it was stored. You can
abandon printing by the CANCEL key.
The memory card is missing.
This message appears when the memory card has been removed from the
memory card slot during memory card operations. Re-insert the same
memory card in the same slot. the printer will continue with memory card
processing.
Insert the same memory card.
This message appears when the memory card has been removed from the
memory card slot during memory card operations and replaced with a different
memory card. Re-insert the same memory card in the same slot. the printer
will continue with memory card processing.
The memory card's battery is low.
This message appears when the printer is in the ready state and the battery of
the memory card installed in the printer is low. You can still enter the memory
card mode, but the battery should be changed as soon as possible.
(Continued on next page)